CD52-A30 Subsea Pig Signaler

Non-Intrusive
The CD52 family of products allow for easy, clamp-on, non-intrusive pig detection passage to depths of 3000 meters (9850 ft) for the CD52-A30 or 4500 meters (14750 ft) for the CD52-A45. Non-intrusive means fewer problems with maintenance and corrosion and no possibilities of leaks. Simple isolation pads may be placed between the detector and the pipe to Ensure zero possibility of galvanic corrosion.

Field Proven
CDI has been manufacturing the patented CD52 family of pig signaler for almost 10 years. With Thousands of systems installed around the globe, the CD52 family has a reliable performance record in burning deserts, frozen Tundras and everything in between. Many of CDI's customers and large oil and gas producers who Rely upon the CD52 family of equipment to set valves, pump stations and control interfaces to SCADA systems.

Battery Powered
The CD52-CD52 A30 and A45 are fully battery-powered and require no existing infrastructure. Two common D-Cell alkaline batteries provide a full five (5) years of life. Changing batteries is as simple as unscrewing the face of the unit, removing the old batteries and inserting two new ones.

Sensing Means
The sensing means of the CD52 and CD52-A30-A45 is a set of patented, non-intrusive proprietary noise canceling antennas. This clever antenna scheme was invented by CDI speci for use in pig passage detection and is available in all CD52 family products. Using this antenna system the CD52-A30 Gives its ability to reject noise and halt nearby magnetic costly triggering false positives. Simply placing a small, safe, permanent magnet onto the pig is all it takes to start using the CD52 or CD52-A30-A45 system.

Topside Signaling
A battery powered acoustic pinger Allows remote signaling of a pig passage to any surface going vessel. Simply lower the receiving acoustic transducer over the side of the vessel and listen for the 1 second pings. By default the CD52 and CD52-A30-A45 pig signalers ping to indicate a pig passage for a period of 36 hours.

Portable
The CD52-A30 / A45 system is small and lightweight enough at 35 lbs (16kg) to be deployed by divers, while at the same time being robust and durable enough to survive the rigors of deep-sea deployment using ROVs. The CD52 and CD52-A30-A45 may be optionally purchased with a protective cage shown above. Regardless of the configuration but the Chosen, the systems can be on site and ready for work within days.

Subsea Easy Installation
Deep water with an ROV installation is quick and easy with CDI's Quick-Clip deployment design. The CD52 and CD52-A30-A45 simply snap onto the pipeline.

Read more »

CD52-M0 Trip Magnet

The CD52-M0 Trip Magnet is a very small and very powerful magnetic trip designed to be used with the CD52 Banit Non-Intrusive Pig Passage signaler in very small pipelines ranging from 3/4 "to 4" to indicate passages to the CD52 Bandit system ,

The CD52-M0 magnet is an assembly with a jacket and without a mounting stud.

Read more »

CD52-M1 Trip Magnet

The CD52-M1 Trip Magnet is a very small and very powerful magnetic trip designed to be used with the CD52 Banit Non-Intrusive Pig Passage signaler in pipelines 4 "to 12" to indicate passages to the CD52 Bandit system.

The CD52-M1 is an epoxy-encased magnet with a PVC jacket and a mounting stud with the American threads of 1 / 2-13.

Read more »

CD52-M2 Trip Magnet

The CD52-M2 Trip Magnet is a small and very powerful magnetic trip designed to be used with the CD52 Banit Non-Intrusive Pig Passage signaler in pipelines 14 "to 30" to indicate passages to the CD52 Bandit system.

The CD52-M2 is an epoxy-encased magnet with a PVC jacket and a mounting stud with the American threads of 1 / 2-13.

Read more »

LineStat Satellite Pig Tracking & Notification

CDI's TRAXALL LineStat is a global, value-added satellite-based event notification service provided by CDI and targeted primarily to the oil and gas pipeline industry. LineStat Provides notification email to SMS text messaging addresses and telephone numbers of remote events from both fixed position and portable equipment. Some of the details included in event notifications messages are date, time, GPS position, battery status, and vibration. This information is transmitted via satellite without use of cellular networks and without needing a wired infrastructure of any kind.

Pig Satellite Tracking Notification to your Blackberry phoneThe LineStat service and equipment may be purchased or rented and used with CDI's pig location and tracking products or any other equipment where remote notifications without an infrastructure is desirable. LineStat can be used with almost any equipment with a signaling output.
As event notification messages from field equipment pass through the LineStat Data Center they are permanently stored in CDI's secure SQL database on a per-radio and per-customer basis. As jobs are performed, the data from remote equipment accumulates and creates fly-over Google Maps interfaces.

A secure and password protected web portal Provides end users with access to this customer-specific historical event data. Previous events may be browsed and numerous reports may be created that allow for statistical analysis of the data. Using the LineStat web portal, batches of radios may be logically grouped together so that different jobs can be separated from one another for reporting purposes.
Pig Satellite Tracking Notification to your iPhone

Destination email and SMS text addresses may be assigned on a per-group basis allowing "Job A" to be reporting to one group of field personnel simultaneously to "Job B" reporting to a different group of personnel. Admins and Managers may be assigned privledges special and may receive notifications from all jobs underway if they so choose.

LineStat is built upon the existing Globalstar low-earth orbit satellite network has global roomates viewability as shown below. The Globalstar network has been in service since 1999 and with over 315,000 subscribers is the world's Reviews largest provider of mobile satellite voice and the data services.

 Service Works LineStat


The LineStat satellite service Provides notifications of pig passages or other field events to end users via emails, text messages or by logging in to the web portal LineStat.
As field equipment is triggered, raw satellite events are received and processed by the LineStat of data servers. Among other things raw Reviews These events Contain the date, time and GPS coordinates of the remote passage location. The trigger of data is stored permanently in the CDI's secure LineStat SQL database and then further processed into informative email notifications and sent to the destination e-mail and text messaging address (es) associated with that specific radio.

Satellite LineStat Pig Passing Notification Sequence

The email and text messages produced by the LineStat servers include the time, date and GPS coordinates. Reviews These emails are further enchanced with Google Earth satellite imagery of the trigger location. If the user desires, he may click on the image in the email and be taken to the interactive Google Earth location.

As work is performed emails will arrive showing the locations. This series of emails can be used to monitor remote equipment or for managers to follow the progress of work underway.

Pricing
LineStat Provides a unique pre-pay pricing structure that Allows for satellite radios and the LineStat messaging service to be purchased with a single fixed-fee. End users are not burdened with a monthly service fee from Globalstar carrier. This Allows the radios and messaging to be purchased as if it were a fixed capital expenditure rather than a service requiring ongoing monthly fees.
CDI takes care of all of the monthly billing, setup and configuration Often work that presents itself as a barrier to ownership with equipment of this kind, and customers do not have reoccurring expenditure justifications to Reviews their management.

The radio standard purchase plan includes two years of fully paid through the Globalstar satellite service and CDI's LineStat service with up to 100 messages per month, per radio (3.3 msg / day avg for each radio). An unlimited number of emails or text messages can be sent from a single trigger event requiring no additional fee. Message bundles and service durations can be upgraded to higher quantities at any time by contacting CDI. 

Read more »

CD52 Bandit Non-Intrusive Pig Signaler with

II 2G Ex d IIB T5 Gb mb

Harsh environments are a fact of life in the world of energy production. The CD52-316SS encases CDI's field-proven and ATEX / IECEx-rated CD52 Bandit non-intrusive pig signaler
in a durable, weather-tight cabinet. This cabinet and all exposed surfaces are made from
316 stainless steel, a material the which is ideally suited for both the harsh saltwater offshore environment as well as the abrasive, sand-blown desert.

Sporting a new and shorter antenna measuring only 9.5 "[241mm] in length, the CD52-316SS system may be deployed into very tight launcher and receiver locations.

The CD52-316SS's new detachable base makes installation simple. Rather than having to contend with the full weight of the system during installation, simply attach the base to the pipeline first and then bolt the antenna assembly to the base. The detachable base Also Provides a convenient way to retrieve the system for anti-theft or maintenance.

The CD52-316SS provides an either normally open or normally closed dry relay contact closures occur when pig passages, providing a simple and effective integration into existing SCADA systems. Conduit connections are made via standard ¾ "NPT or metric M20 connections.
316 stainless steel sun shade
Visual indications include large, clear LCD segments roomates light upon passages and clear Themselves automatically, as well as an optional Remote Indication System roomates may be seen to 100+ meters.

An optional 316 stainless steel sunshade (right) may be added to the system to provide head Increased shedding in deserts and other areas with high levels of direct sunlight. The overall temperature inside the cabinet is reduced, prolonging the life of the electronics (and batteries if used). Marine Also or other coatings may be applied to the cabinet by request to further increase of the CD52-316SS's corrosion resistance.

Read more »

CD52 Bandit Non-Intrusive Pig signaler

CD52 Bandit Non-Intrusive Pig signaler
with UL / CSA Class 1 Division 1 Hazardous Location Certification
The CD52 Bandit is a non-intrusive pig signaler roomates uses either permanent magnets or active transmitters mounted onto the pig to detect passage from 0.022 to 45.73 mph (0.01m / s to 20 m / s). With Thousands of systems sold around the world over the past 15 years, the CD52 pig signaler has developed a strong reputation in the industry for its reliability and durability in even the harshest environments.

A relay closures on passage Allows the Bandit to be interfaced to a wide variety of systems Including SCADA, PLC's, lights, horns, etc.

Features include:
• Completely non-intrusive to the pipeline
• Designed for permanent installation direct burial with many standard stalk heights and types
• Armored flex cable options available
• Portable version for onshore and offshore with carring case
• Every unit is UL / CSA rated Class 1, Division 1 hazardous location for
• Bi-directional pig detection
• Detection of both transmitter and permanent magnet equipped pipeline pigs
• Automatic retention of the 10 most recent pig passage times and dates,
• Powered for one full year with two D-Cell alkaline batteries or permanently powered with 24VDC
• Easily bands to pipelines from 2 "to 60"
• Works with wall thicknesses of 1.5 inches [38mm] (contact CDI when WT greater than 1 "[25.4mm])

316 stainless steel sun shadeThe UL / CSA version of the CD52 Bandit Allows simple and reliable non-intrusive detection of pig passages anywhere within your pipeline network. Simply strap the CD52 onto a pipeline and it Immediately begins scanning for both transmitter and permanent magnet equipped pig passages.

When pig passages occur Reviews their times and dates, are displayed to the operator along with a flashing "Recent Passage" message. If multiple pig passages have occurred, one can simply scroll back through the passage Bandit's memory and retrieve the time and date of any one of the last 10 passages.

When pig passages occur, in addition to the visual indications the CD52 Bandit initiates a dry relay contact closure (which may be wired normally open or normally closed) for 15 seconds. This relay can support an electrical connection of 120VAC to 30VDC or 1A to 3A.

Using CDI's proprietary satellite LineStat notification service the CD52 pig signaler can notify operators of pig passages to Reviews their email inbox or smart phone any time day or night.

The Bandit's standard enclosure is a fully certified explosion-proof aluminum housing with a tempered glass window.

The optional 316 stainless steel sunshade (pictured above and in the gallery below), is a recommended option to increase of heat shedding in deserts and other areas with high levels of direct sunlight. The overall temperature inside the explosion-proof housing is lowered the which in turn prolongs the life of the electronics (and batteries if used). 316 stainless steel construction of the sunshade guarantees long life in the harsh environment pipeline.

CDI manufactures a family of small permanent magnets that are designed speci cally for use with the CD52 Bandit. Reviews These magnets are durable epoxy encapsulated cylinders with outer jackets and mounting studs; when mounted to or placed inside virtually any type of pipeline pig it can then be tracked by the CD52 throughout a pipeline network. Since Reviews These magnets do not require batteries or have any active components, Reviews their usable life is outstanding.

Although Several options are available for the CD52 Bandit that allow customization, Often there are special uses that require something new. If you have a special requirement for this equipment CDI give a call; special orders for this equipment are commonplace.

Read more »